A Formal Analysis of Statue of Liberty by Andy Warhol

A Formal Analysis of Statue of Liberty by Andy Warhol Andy Warhol created his painting Statue of Liberty in 1962. The painting’s subject is, obviously, the Statue of Liberty, repeated twelve times in a 4 by 3 matrix. The painting belongs to the Andy Warhol Museum in Pittsburgh, Pennsylvania; however it is being auctioned on November 14th at Christie’s in New York. It is rather large at 80 by 61 inches. To be able to see the entirety of the painting, one must stand back several feet. The image that appears twelve times in the painting is the Statue of Liberty facing forward from her legs up.One can see most of the statue, including the torch, and the horizon behind her. The painting is composed mostly of a cool blue. In addition to the blue, a vibrant red is included, creating a contrast in the painting. Strangely enough, the painting is not centered, but rather aligned to the right, leaving a lot of unused space on the left. The repetition of the statue forms a harmony of sorts, but the individual coloring creates a small separation. The original image of the statue appears that it was not painted, though it contrast between the ocean and the sky makes it seem like the picture might have been altered.The sky in the background matches the color of the linen. The image shows the statue dead center with the ocean filling two thirds of it and the sky filling the other third. In a majority of the rectangles there is a splotch of darker blue than what is used on the statue that covers the statue’s torch and torch, keeping one from seeing everything completely. Only two of the images include red paint, excluding the images on the far right that are cut off. The grid of the images creates six or seven implied lines.There is also an implied line from the bottom of the left side of the statue to the tip of the torch. There is a line created along the horizon of the dark ocean and the bland sky. There are contrasted lines within the ocean to show wave s or motion using the linen as the background color. The face of the statue varies in visibility between each square. It varies between visible, somewhat visible, and not visible between the images. The appearance changes from square to square. Together, the squares show harmony since the statue is fixed in place. The variation occurs with the splotch on the statue’s face.It seems to move, or disappear, from the top left to the bottom right square, giving the painting its variation. The splotch that covers Lady Liberty’s face can possibly emphasize the face or the torch she holds. The important matter is possibly the face that she is, or isn’t, covered, though it is in an inconsistent way to induce speculation of the artwork. Symmetry has been used to show uniformity or order. Since the painting is aligned to the right it doesn’t show uniformity in that aspect. The image, on the other hand, is very uniform. The entirety of the painting expresses almost an ordered chaos.The squares show strange, jagged shapes that are indistinguishable across the painting. Each one of them is much lighter than the color in the square. The shapes are presented as shadows, and from square to square it seems as though they are moving as they would through a film strip. Even though the Statue of Liberty is enormous, it's seems to be shrunken in this artwork. The shrunken statue is then multiplied by twelve and fluidly placed on the linen canvas. The movement of the blue splotch and the white shadow overlay gives a sort of flow across the piece.The repetition of the image in the squares could possible represent the variety of ways that America is perceived by people. The variation of color and the distortion of the face/torch by the blue splotch could represent the different experiences of people in the country. The blank area on the left of the piece depicts the abundance of opportunity in America. The repetition of the same picture, on the other hand, c ould show a generic form of America, but with the variation of color could represent that it could differ with some very small details. The painting is somewhat ambiguous in this way, but is great nonetheless.

The Root Of All Evil, Macbeth

G. R. Elliot once said, â€Å"wicked intention must in the end produce wicked action unless it is not merely revoked by the protagonist’s better feelings, but entirely eradicated by his inmost will, aided by Divine grace. † This statement can be directly applied to Macbeth’s descent into the darker recesses of human nature and what human weaknesses this classical tragic figure struggles with and finally succumbs to, causing his downfall. In William Shakespeare’s famous play, Macbeth is drawn to the murder of King Duncan, Banquo, and Fleance by his yearning for power. How could such a ourageous, gentle man such as Macbeth suddenly be transformed and drawn to do such evil? Surely he did not come up with such villainous thoughts of his own. His desire for control, authority, and jurisdiction was strengthened by evil sources, those from both the witches’ prophecies and his wife’s encouragement. In Macbeth it is very clear that evil begets evil. Shakespeare focuses on Macbeth’s courage early in the play. For example, Duncan and the sergeant both compliment Macbeth’s mental and physical bravery in Act I, Scene II. Macbeth â€Å"carv’d out his passage† until he and the enemy eneral were face to face. In the same act, the reader is told that Macbeth is brave because of his â€Å"disdaining Fortune. † In addition to his quality of courage, Macbeth is also a gentle man. Demonstrating his love and devotion for his wife, Macbeth refers to her as â€Å"his dearest partner of greatness† in Act I, Scene V. Lady Macbeth views his kindness as somewhat of a problem for their quest for power. She says that Macbeth is â€Å"too full o’ the milk of human kindness† to place them on the throne of Scotland as a result of murder. Macbeth realizes that Duncan is, n fact, a good and humble king, and other than to fulfill self-centered, uncontrolled ambitions, this is not reason to murder him. Macbeth is soon pressured into the murder of Duncan by both his wife and the three witches. The three witches are supernatural instruments of fate who predicted that Macbeth will become King of Scotland. In act I, scene III, the witches chant, â€Å"All hail, Macbeth! Hail to thee, Thane of Glamis! / All hail, Macbeth! Hail to thee, Thane of Cawdor! / All hail, Macbeth! That shalt be King hereafter! When Macbeth hears this prophecy, many questions nstantly begin to run through his head. He begins to wonder, what are they talking about and how will I become king? Macbeth does not entirely trust the witches, for he does identify them with evil. The foretelling of the witches spark the plot of the murder. The spark becomes a flame when Lady Macbeth hears of the prophecy. Lady Macbeth is canny and masterful as she propels Macbeth to kill Duncan. She binds Macbeth’s attention to the throne of Scotland, but never to the severity of the crime. Lady Macbeth is clever when she constantly urges Macbeth to forget about his torments and the brutal death he has aused. Before the actual murder, Macbeth is shrouded with fear. Banquo can also see the fear in Macbeth, although he does not know about the plan of murder when he asks, â€Å"Good sir, why do you start, and seem to fear/ Things that do sound so fair? † He ponders what would happen if he fails, and discusses this possibility with his wife. He struggles with fear in the presence of Lady Macbeth but she constantly reassures him that there is nothing to fear and that the murder will be for the better. This fear demonstrates that Macbeth does realize the difference between right and rong, good and evil, and the consequences, but the outcome, which is murder, proves he can be swayed in his beliefs and concerns. Macbeth was pressured to do a horrible deed which was driven by evil. The beginning of the evil was rooted in his wife and the witch’s but quickly spread into his mind and heart. Macbeth was soon contaminated by evil, although he realized what he had done was wrong. Macbeth says, â€Å"To know my deed, ’twere best not know myself,† meaning that committing such a vile act makes him uncomfortable. Evil drives Macbeth to later kill Banquo and Fleance for fear they know hat Macbeth was the murderer. One evil lead to another, for if he had not done evil by killing Duncan then he would not have done evil with the death of his best friend and his son. All the evil they committed to gain power, which was what they always wanted, led to great sorrow. They realized that the dead were much happier. While Macbeth and his wife were wracked with guilt and paranoia, Duncan was seen as the lucky in the eyes of Macbeth. He did not have any threats and was much safer than Macbeth who is feared losing his throne. Macbeth made these feelings clear when he said, â€Å"In restless ecstasy. Duncan is in his grace;/ After life’s fitful fever he sleeps well. / Treason has done his worst; nor steel, nor poison,/ Malice domestic, foreign levy, nothing,/ Can touch him further. † Macbeth, soon killed by Macduff, now, too, can rest with worry. Lady Macbeth was also troubled by feelings of guilt. In her sleep she screams, â€Å"Out, damned spot! Out, I say! †¦/Yet who would have thought the old man to have had so much blood in him. † Lady Macbeth is suffering from a dieses which she created from evil. Trouble and suffering have come into their lives in the place of power. Lady Macbeth ultimately kills herself, ending up in a state of peace without worries along with her husband. Macbeth is a basically good man who is troubled by his conscience and loyalty though at the same time is struggling with evils of ambition and murder. He is led to evil initially by the witches’ predictions and then by his wife’s goading, which he succumbs to because of his love for her. Lady Macbeth rids herself of any kindness that might stand in the way and fills that void with evil to achieve her ambitions. In both cases evil becomes controlling so much that both of there normal lives are ruined.

Research Paper on JetBlue Example | Topics and Well Written Essays - 4250 words

On JetBlue - Research Paper Example The current paper is based upon analyzing the different costing techniques which an organization undertakes in order to acquire better financial efficiency. Accordingly, the current paper incorporates evaluation of activity based, standard and relevant costing techniques. The research incorporates analyzing such costing techniques by associating the same in context of JetBlue. The different circumstances under which JetBlue might undertake such costing techniques and their long run implications have been discussed upon. The paper begins with a brief analysis of JetBlue’s background, their span of operations and their general strategies to success. The subsequent sections of the paper include evaluating different costing processes and the manner in which JetBlue can incorporate the same to better manage their financial resources. The data for the current paper has been largely been collected from secondary sources such as web publications, journals and books. The study essentia l follows a descriptive and an interpretative approach. The research technique followed is essentially qualitative. JetBlue is a low cost airline with its head office situated in Long Island City, the U.S. It is seen to operate in 12 countries which include nations of Latin America, South America and the Caribbean. The company serves 87 destinations spread across 24 states (JetBlue, 2014). JetBlue focuses crucially upon providing excellent and timely services which are priced economically. The flight services of JetBlue can be crucially be divided into two important segments, essentially business class and economy class. JetBlue tries to create differentiation in their service offerings by incorporating the aspect of quality, which most low cost carriers are seen to emphasize less upon. Superior personal space and complimentary entertainment are considered as important aspects by the firm. Innovation and sustainable

How does due diligence differ from due care Why are both important Essay

How does due diligence differ from due care Why are both important - Essay Example nd, is most often defined as the test of liability for negligence whenever there is a question as to whether a person acted in an ordinary and reasonable manner in terms of certain instances considered to be an issue at the time. Each person who enters into a business arrangement, negotiation, or contract usually based upon certain everyday concerns that can be addressed without having to take extra ordinary measures. Due care insures that the agreement was not entered into in a haphazard manner by either party and that the contract or arrangement does not have any adverse effect on the parties concerned. Both due diligence and due care are important aspects of contractual agreements because these two factors, once proven to exist in any contract, could be used to negate or void any agreement based upon legal standards. It is therefore imperative that both parties entering into any agreement ensure that due care and diligence are properly exercised in the creation of the contract and its terms and

Employee Privacy Rights at Work Essay Example | Topics and Well Written Essays - 1500 words

Employee Privacy Rights at Work - Essay Example 897). The rights of the company have been upheld time and again. However, the real issue the company must address is finding the proper balance between the two. As Bupp (2001) pointed out, although the company has a wide range of monitoring open to it, studies have found that too much monitoring can also cause undo stress and be demoralizing for employees. Finding the balance that protects the company's interests while ensuring employees are afforded an adequate measure of perceived respect and privacy becomes the aim of modern business in today's technologically advanced work environment. How that balance may be achieved is the focus of this research. As upheld in the Electronic Communications Privacy Act, 18 USCA 2510 of 1986 (ECPA), employers, as owners of the premises and communications equipment, have many rights of which employees may be unaware. According to Volkert (2005) employers may "search company-owned computers, monitor Internet use, use video surveillance and listen to voice mail" (p. 1). As early as 2001 Bupp found when reviewing an American Management Association survey report that as of 2001 73.5% of all major companies in the U.S. "record and review employee communications and activities on the job, including their phone calls, e-mail, Internet connections, and computer files" (p. 74). An additional 5% monitor phone logs and/or use video surveillance cameras. In 88% of the cases where the company electronically monitors employees' working habits, the employee is informed of the methodology the company uses to monitor their behavior. The need for monitoring of employees has stemmed from documented cases of employee theft of proprietary information from their employer as well as theft of company time by employees who instead of working at the job for which they were hired to be perform, spend an inordinate amount of company time on personal business thereby reducing the productivity of the company. Lichtash (2004) points out that use or misuse of company time by employees in surfing the internet or sending and receiving inappropriate email can lead to serious consequences to the employer including lost productivity and in some instances may lead to a perceived hostile work environment or charges of sexual harassment when email is used to circulate offensive contents. For those reasons alone "employers have a clear interest in restricting the use of their e-mail and Internet systems" (p. 27). Lichtash (2004) has also noted that there are varying degrees of use or misuse of company email. Firstly, many employers recognize that time restraints sometimes require employees to occasionally use company time to conduct some degree of personal business which the company generally allows or overlooks. The second type of misuse is more serious abuse of company systems that would warrant disciplinary action was the company to detect it. The last type of abuse is flagrant misuse resulting in a direct or potential substantial loss to the company which would result in immediate termination if the company was aware of the

Wireless microphone Essay Example | Topics and Well Written Essays - 750 words

Wireless microphone - Essay Example In this scenario, Moores attached the wireless transmitter inside the clothes used by the character Abanazar, and it was an excellent experiment which worked exactly according to plan. However, Moores could not get a patent for his idea for the reason that he was not legally making use of the radio frequency 76 MHz. Hence, it was decided by the producers of the ice show that they would stop making use of this wireless device; and instead of this device they would employ singers and actors in order to perform using secret microphones for dubbing voices of the other ice skaters in order that they could be freed to focus on their skating (Boly Electronics., 2010). In addition, Moores mentioned his prototype of 1947 in the Science Museum in London in the 1972. Since the first usage of wireless microphone it is being used in different forms in different places. A model of wireless microphone introduced in 1958 was manufactured by Sony which was called Sony CR-4 in 1960 and this wireless microphone was being suggested for nightclub acts and theatre performances. As mentioned above, a large number of manufacturers and individuals claim that they are the actual inventors of wireless microphone. In this scenario, Beyerdynamic that is a German equipment manufacturer, claims that the first wireless microphone was transistophone which was invented by Hung C. Lin., However, it appeared in the public in 1962. In addition, in 1964 wireless microphone was used for the first in a film in order to record sound while filming a motion picture in the 1964 film My Fair Lady. First compander wireless microphone came with Wider dynamic range in 1976, which was pr oduced by Nady Systems. Additionally, The Rolling Stones and Todd Rundgren were the first famous musicians that made use of these systems during a live concert. In 1996, Nady, Sennheiser, CBS and Vega got a combined

International finance Research Paper Example | Topics and Well Written Essays - 1750 words

International finance - Research Paper Example Engaging in International trade is important for the economies of the two or more countries involved; because there is an exchange of foreign currencies, creation of jobs and enhancement of revenues through taxation of the business profits. For multi-national organizations to survive in this import and export trade, they have to employ financial tools in their assessments, and this includes financial agreements and use of security exchanges. A product of trade in international finance varies depending on locations, legal requirements of operating in such destinations and transaction requirements. This paper seeks to assess the impact of selling beverages from United States of America into the Kenyan market. Abinam Inc. has been in the beverage industry for over 20 years, and recently decided to expand its operations in Africa, and specifically East Africa. To start its operations, the company identified Kenya as a convenient starting point because of its economic dominance in East Af rica, and the high quality its infrastructure, which includes roads and telecommunications. The Kenyan political structure advocates for liberalization and a free market economy and all this are conducive for our operations. Kenya is a lucrative destination of the beverage industry because of the financial capabilities of its citizens and their thirst for new ideas and products. In analyzing the practicality of beverage sale in Kenya, this paper seeks to identify the different methods of International Business that Abinam Inc. will employ in the Kenyan market. It will assess Kenyan balance of current account in the last ten years to determine whether the planned beverage product is an export of the country. This paper will analyze Kenyan main exports and thereafter use them to predict the profitability rate of the beverage products. In achieving this, this paper will scrutinize the import data of Kenya for the last ten years and thereafter make a conclusion regarding the beverage pr oducts. This paper will review the import control mechanisms of the Kenyan State in order to assess the possibility of Abinam Inc. in conducting trade in the and its effects in its operations. In analyzing these mechanisms, this paper will identify specific controls set by the Kenyan government, giving an explanation of its intended objectives and thereafter its effect in the operations of beverage sale of Abinam Inc. This paper will review the changes in the various currencies of the two states, i.e. American Dollar and the Kenyan Shilling. This will help in analyzing the type of currencies to use, since changes in currencies can affect the profitability of a business organization. In understanding the foreign exchange rates of the two currencies, Abinam Inc. will be able to develop currency features which will minimize risks associated with fluctuations in foreign exchange rate. This paper has a conclusion, which highlights the process of registering a business organization in Ken ya. Kenyan economy is agriculturally based and it imports most of its products from Europe and Asia, because of this, most of its international trade is skewed in favor of the industrialized states. In the last ten years, the Kenyan current account has seen a deficit (Goswami and Matoo, 2012). A current account is the balance between values of the country’s imports compared to the revenues generated from its exports. The current

Model in the projection of equity portfolio Essay

Model in the projection of equity portfolio - Essay Example Company owners, executives, as well as all stakeholders assess various aspects in strategic planning and analysis of uncertainty using modeling techniques. Using financial modeling, various stakeholders can engage in calculated risks and as such minimize failure dangers while at the same time keeping client rewards at optimal levels. The aim of literally any investment analysis is being able to come up with appropriate investment decisions and even advice others on the best ways in making their investment decisions. Consequently, there exists an inextricable link between equity analysis and management of equity portfolio. Nonetheless, even for those with sufficient comprehension of equity analysis, there are a number of mechanical portfolio management elements which need to be addressed prior to construction and running of the respective equity portfolios. As exercised with professionals, real-life application of hypothetical investment ideas involves looking beyond expertise and one ’s training levels. More often than not, managing a group of portfolios incorporates comprehensive detail attention, computerization of the information, as well as embracing the need for administrative effectiveness. Generally, the mechanics of portfolio management and more particularly projection of equity portfolios require a comprehensive and more object-oriented approach. In essence, managers who look after equity portfolios have to make a choice as to whether or not they adopt a given approach in management of the respective equity portfolios (Onyango, 2003, pp. 45). Investment firms often have strict defined parameters which they make use of in stock selection and general management of their investment. Background information In the recent past, managers and many other stakeholders have taken to portfolio modeling. Portfolio modeling has come to occupy a central place in the business landscape. Whether one is running a single portfolio or lots of them in a single equity investment product, style construction and maintenance of a portfolio model is a common procedure in management of equity portfolio. More often, portfolio models acts as the standards upon which individual portfolios are equated. In general, the managers of a portfolio assign a weighting percentage to each stock in the model of the portfolio after which individual portfolios are further modified to match against the assigned weighting mix. Usually, computerized portfolio models assisted by software such as Excel, SPSS, and matlab, among others. As an example, after running a mix of corporation analyses, departmental analyses, as well as macro-economic analyses, a manager make a decision as to whether or not to own a substantial weight of a specified stock. In essence, models help in obtaining of portfolio efficiency with regard to portfolio analytics. With models, a portfolio manager may need to get an understanding of may be 30 or 50 stocks owned in similar ratios in the entire po rtfolio, instead of 100 or 250 stocks owned in different ratios in over a thousand varying portfolio accounts. Analyzing 30 or 50 stocks can be easily applied to the entire portfolio by altering weights in the model of portfolio over a specified time. What makes portfolio models outstanding is that as the individual stocks vary with time, a portfolio mana

Computer aided design in mechanical engineering Essay

Computer aided design in mechanical engineering - Essay Example This lowered the cost of production per unit and enabled the production of goods that were cheap and could be bought by the general population. Ever since, the manufacturing process has undergone tremendous improvements, which has led to improved efficiency and lowered the cost of production further. The improvements in the electronics and computer design have led to the development of computer-controlled control systems. These systems are advantageous over previously used systems as they can be easily manipulated to change the output. Computer Aided Manufacturing (CAM) refers to the use of Numerical Control (NC) software applications to create G-code, which are the instructions fed to numerical control machines to produce the required output. The use of CAM has led to the production of high quality products. CAM can also be defined as the process of producing a manufacturing plan for the design of tools and models, and coordinating the machines, and simulation. The plan is then carried out on the production line. For machines to operate, they require a form of control. There are various types of control mechanism available including manual control, automatic control and computer control. Machines used for mass production are often expected to produce to repeat similar operations precisely and fast. They should repeat these processes repeatedly. This requires automation to improve the speed of these processes. Common techniques that are used in the control systems of machines include electrical systems, pneumatic systems, and mechanical systems. For such systems, if a change is required, the procedures necessary to effect the change are long, tedious, and expensive. Advances in computer and electronic technologies have been employed to design systems that are more flexible. The use of these technologies leads to an increase in the efficiency of machinery produced. The products produced are of better quality and are cheaper (Elanchezhan, Sunder &